Agilent Technologies X Series Manual page 177

The parameters affected are:
Parameter
Timebase DAC
Timebase DAC setting
Auto Align State
Auto Align All but RF
Auto Align Alert
Key Path
Mode
Example
Notes
Initial S/W Revision
Backup or Restore Align Data...
Opens the utility for backing-up or restoring the alignment data.
Alignment data for the instrument resides on the hard drive in a database. Agilent uses high quality hard
drives; however it is highly recommended the alignment data be backed-up to storage outside of the
instrument. Additionally, for customers who use multiple CPU Assemblies or multiple disk drives, the
alignment that pertains to the instrument must be transferred to the resident hard drive after a CPU or
hard drive is replaced. This utility facilitates backing-up and restoring the alignment data.
This utility allows the operator to navigate to any location of the Windows file
NOTE
system. It is intended that the operator use a USB memory device or Mapped
Network Drive to backup the alignment data to storage outside of the instrument.
Key Path
Initial S/W Revision
Key Path
Mode
Remote Command
Setting
Calibrated
Calibrated value
Normal (if the instrument is not operating with
default alignment data, Off otherwise)
Off
Time & Temperature
System, Alignments
All
:SYST:DEF ALIG
Alignment processing that results as the transition to Auto Alignment Normal
will be executed sequentially; thus *OPC? or *WAI will wait until the
alignment processing is complete.
Prior to A.02.00
System, Alignments
A.02.00
System, Alignments
All
:CALibration:DATA:DEFault
System Functions
System
177