System Functions
System
Key Path
Example
Initial S/W Revision
Restore Mode Defaults (All Modes)
This selection resets all of the modes in the instrument back to their default state just as a Restore Mode
Defaults does and it switches the instrument to the power-on mode and causes the default measurement
for the power-on mode to be active. This level of Restore System Defaults does not affect any system
settings, but it does affect the state of all modes and does cause a mode switch unless the instrument was
already in the power-on mode.
Confirmation is required to restore the factory default values. The confirmation dialog is:
Key Path
Example
Couplings
Initial S/W Revision
198
System, Restore System Defaults
:SYST:DEF MISC
Prior to A.02.00
System, Restore System Defaults
:SYST:DEF MOD
An All Mode will cause the currently running measurement to be aborted,
mode switch to the power-on mode and activate the default measurement for
the power-on mode. It gets the mode to a consistent state with all of the default
couplings set.
Prior to A.02.00