Agilent Technologies X Series Manual page 618

View/Display
Clear Title
Clears a title from the front-panel display. Once cleared, the title cannot be retrieved. After the title is
cleared, the current Measurement Name replaces it in the title bar.
Key Path
Example
Notes
Preset
Initial S/W Revision
Graticule
Pressing Graticule turns the display graticule On or Off. It also turns the graticule y-axis annotation on
and off.
Key Path
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Display Line
Activates an adjustable horizontal line that is used as a visual reference line. The line's vertical position
corresponds to its amplitude value. The value of the display line (for example, "–20.3 dBm") appears
above the line itself on the right side of the display in the appropriate font.
The display line can be adjusted using the step keys, knob, or numeric keypad. The unit of the Display
Line is determined by the Y axis unit setting under Amplitude. If more than one window has a display
line, the display line of the selected window is controlled.
If the display line is off the screen, it shows as a line at the top/bottom of the screen with an arrow
pointing up or down. As with all such lines (Pk Thresh, Trigger Level, etc.) it is drawn on top of all
traces.
The display line is unaffected by Auto Couple.
Key Path
618
View/Display, Display, Title
DISP:ANN:TITL:DATA "" clears any existing title characters.
Use the :DISPlay:ANNotation:TITLe:DATA <string> command with an
empty string.
Performed on Preset.
Prior to A.02.00
View/Display, Display
:DISPlay:WINDow[1]:TRACe:GRATicule:GRID[:STATe]
OFF|ON|0|1
:DISPlay:WINDow[1]:TRACe:GRATicule:GRID[:STATe?
DISP:WIND:TRAC:GRAT:GRID OFF
The graticule is the set of horizontal and vertical lines that make up the
grid/divisions for the x-axis and y-axis.
On
saved in instrument state
Prior to A.02.00
View/Display, Display