Agilent Technologies X Series Manual page 256

Complex Spectrum Measurement
Meas Setup
Remote Command
Example
Notes
Dependencies
Preset
State Saved
Min
Max
Initial S/W Revision
ADC Dither
Opens the ADC Dither menu.
Key Path
Initial S/W Revision
ADC Dither Auto
Toggles automatic ADC dither on or off.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
256
[:SENSe]:SPECtrum:FFT:LENGth <integer>
[:SENSe]:SPECtrum:FFT:LENGth?
SPEC:FFT:LENG 566
SPEC:FFT:LENG?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
Grayed out when Length Ctrl is set to Man.
2048
Saved in instrument state.
8
131072
Prior to A.02.00
Meas Setup, Advanced
Prior to A.02.00
Meas Setup, Advanced, ADC Dither
BASIC
[:SENSe]:SPECtrum:ADC:DITHer:AUTO[:STATe] ON|OFF|1|0
[:SENSe]:SPECtrum:ADC:DITHer:AUTO[:STATe]?
SPEC:ADC:DITH:AUTO 0
SPEC:ADC:DITH:AUTO?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
ON
Saved in instrument state.
Auto|Man
Prior to A.02.00