Agilent Technologies X Series Manual page 600

Trigger
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Trig Delay
Controls a time delay during which the analyzer will wait to begin a sweep after meeting the trigger
criteria. You can use negative delay to pre-trigger the instrument in time domain or FFT.
Key Path
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
I (Demodulated)
Pressing this key, when it is not selected, selects the main receiver's output I voltage as the trigger. The I
(Demodulated) trigger condition is met when the I voltage crosses the I voltage trigger level.
Key Path
Example
Readback Text
Initial S/W Revision
600
Trigger, Baseband I/Q, I/Q Mag
:TRIGger[:SEQuence]:IQMag:SLOPe POSitive | NEGative
:TRIGger[:SEQuence]:IQMag:SLOPe?
TRIG:IQM:SLOP POS
POSitive
Saved in instrument state
Prior to A.02.00
Trigger, Baseband I/Q, I/Q Mag
:TRIGger[:SEQuence]:IQMag:DELay <time>
:TRIGger[:SEQuence]:IQMag:DELay?
:TRIGger[:SEQuence]:IQMag:DELay:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:IQMag:DELay:STATe?
TRIG:IQM:DEL 10 ms
TRIG:IQM:DEL:STAT ON
1 us
OFF
Saved in instrument state
–2.5 s to +10 s
Prior to A.02.00
Trigger, Baseband I/Q
TRIG:<meas>:SOUR IDEM
I
Prior to A.02.00