Agilent Technologies X Series Manual page 447

4
3
2
1
0 1 2 3 4 5
The correction to be used for each bucket is taken from the interpolated correction curve at the center of
the bucket.
Description
Sets an ASCII description field which will be stored in an exported file. Can be displayed in the active
function area by selecting as the active function, if desired to be in a screen dump.
Key Path
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Comment
Sets an ASCII comment field which will be stored in an exported file. Can be displayed in the active
function area by selecting as the active function, if desired to be in a screen dump.
Key Path
Remote Command
Example
Notes
Preset
State Saved
6 7 8 9 10 11
Input/Output, Corrections, Properties
[:SENSe]:CORRection:CSET[1]|2|3|4|5|6:DESCription
"text"
[:SENSe]:CORRection:CSET[1]|2|3|4|5|6:DESCription?
:CORR:CSET1:DESC "11941A Antenna correction"
45 chars max; may not fit on display if max chars used
Unaffected by a Preset. Set to empty by
Saved in instrument state.
A.02.00
Input/Output, Corrections, Properties
[:SENSe]:CORRection:CSET[1]|2|3|4|5|6:COMMent "text"
[:SENSe]:CORRection:CSET[1]|2|3|4|5|6:COMMent?
:CORR:CSET1:COMM "this is a comment"
45 chars max; may not fit on display if max chars used
Unaffected by Preset. Set to empty by
Saved in instrument state
12 13 14 15 16 17
Restore Input/Output Defaults
Restore Input/Output Defaults
Input/Output
vsd18
18 19 20
447