Agilent Technologies X Series Manual page 462

Input/Output
State Saved
Initial S/W Revision
Off
Turns off the analog output.
Key Path
Example
Readback Text
Initial S/W Revision
Screen Video
Selects the analog output to be the screen video signal. In this mode, the pre-detector data is output to
the Analog Out connector. The output looks very much like the trace displayed on the analyzer's screen,
and depends on the Log/Lin display Scale, Reference Level, and dB per division, but is not influenced by
the selected detector or any digital flatness corrections or trace post-processing (like Trace Averaging).
Note that this mode is similar to the Analog Output of the HP 8566 family and the Video Out (opt 124)
capability of the Agilent PSA analyzer (E444x), although there are differences in the behavior.
See "Backwards Compatibility:" on page
Key Path
Example
462
Saved in Input/Output State
A.04.00
Input/Output, Output Config, Analog Out
OUTP:ANAL OFF ! causes the analog output to be off
Off
A.04.00
463.
Input/Output, Output Config, Analog Out
OUTP:ANAL SVID