Agilent Technologies X Series Manual page 286

Waveform Measurement
AMPTD Y Scale
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision
Ref Position (I/Q Waveform View)
Positions the reference level at the top, center or bottom of the Y Scale display. Changing the reference
position does not change the reference level value.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision
286
:DISPlay:WAVeform:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:RPO
Sition TOP|CENTer|BOTTom
:DISPlay:WAVeform:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:RPO
Sition?
DISP:WAV:VIEW:WIND:TRAC:Y:RPOS CENT
DISP:WAV:VIEW:WIND:TRAC:Y:RPOS?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
TOP
Saved in instrument state.
Top|Ctr|Bot
Prior to A.02.00
A.03.00
AMPTD Y Scale
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:DISPlay:WAVeform:VIEW2:WINDow[1]:TRACe:Y[:SCALe]:RPOSi
tion TOP|CENTer|BOTTom
:DISPlay:WAVeform:VIEW2:WINDow[1]:TRACe:Y[:SCALe]:RPOSi
tion?
DISP:WAV:VIEW2:WIND:TRAC:Y:RPOS CENT
DISP:WAV:VIEW2:WIND:TRAC:Y:RPOS?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
CENT
Saved in instrument state.
Top|Ctr|Bot
Prior to A.02.00
A.03.00