Agilent Technologies X Series Manual page 507

Example
Initial S/W Revision
Analog Demod
Selects the Analog Demod mode for making measurements of AM, FM and phase modulated signals.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
Bluetooth
Selects the Bluetooth mode for Bluetooth specific measurements. There are several measurements
available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
TD-SCDMA with HSPA/8PSK
Selects the TD-SCDMA mode for general purpose measurements of signals following this standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If
it is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Example
Initial S/W Revision
INST:SEL NFIGURE
Or
INST:NSEL 219
Prior to A.02.00
Mode
INST:SEL ADEMOD
INST:NSEL 234
Prior to A.02.00
Mode
INST:SEL BT
INST:NSEL 228
A.06.01
Mode
INST:SEL TDSCDMA
INST:NSEL 211
Prior to A.02.00
Mode
507