Agilent Technologies X Series Manual page 136

System Functions
Save
Save As . . .
This menu lets you select the location where you can save Data Type files. It is a standard Windows®
dialog with Save As menu keys. The "File Name" field in the Save As dialog is initially loaded with an
automatically generated filename specific to the appropriate Save Type. The automatically generated
filename is guaranteed not to conflict with any filename currently in the directory. You may replace or
modify this filename using the File Name key. See the Quick Save key documentation for more on the
automatic file naming algorithm.
When you first enter this dialog, the path in the Save In: field depends on the data type. The only files
that are visible are the files with the corresponding data type suffix, and the Save As type lists the same
suffix.
For example, if the Data Type is Amplitude Corrections, the file suffix is .csv and the *.csv files are the
only visible files in the Save As dialog and .csv is the Save As Type.
The default path for saving files is:
For all of the Trace Data Files:
My Documents\<mode name>\data\traces
For all of the Limit Data Files:
My Documents\<mode name>\data\limits
For all of the Measurement Results Data Files:
My Documents\<mode name>\data\<measurement name>\results
For all of the Capture Buffer Data Files:
My Documents\<mode name>\data\captureBuffer
Key Path
Mode
Notes
Initial S/W Revision
Save
Saves the specified Data Type. This section describes any specific save behavior relevant to Data that is
common to all modes.
When a Save of a specific Data File is requested, the specified data is saved to the specified or selected
file. The save is performed immediately and does not wait until the measurement is complete.
If the file already exists, a dialog will appear that allows you to replace the existing file by selecting
or you can the request.
Cancel
136
Save, Data
All
The key location is mode-dependent and will vary.
Brings up the Save As dialog for saving a <mode specific> Save Type
Prior to A.02.00
OK