Agilent Technologies X Series Manual page 189

Enabled
Enables the GPIB Controller capability.
Key Path
Example
Initial S/W Revision
SCPI LAN
Activates a menu for identifying and changing the SCPI over a LAN configuration. There are a number
of different ways to send SCPI remote commands to the instrument over LAN. It can be a problem to
have multiple users simultaneously accessing the instrument over the LAN. These keys limit that
somewhat by disabling the telnet, socket, and/or SICL capability.
Key Path
Initial S/W Revision
SCPI Telnet
Turns the SCPI LAN telnet capability On or Off allowing you to limit SCPI access over LAN through
telnet.
Key Path
Mode
Remote Command
Example
Preset
Preset
State Saved
Range
Initial S/W Revision
SCPI Socket
Turns the capability of establishing Socket LAN sessions On or Off. This allows you to limit SCPI
access over LAN through socket sessions.
Key Path
Mode
System, I/O Config, GPIB, GPIB Controller
:SYST:COMM:GPIB:CONT ON
A.02.00
System, I/O Config
Prior to A.02.00
System, I/O Config, SCPI LAN
All
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle?
:SYST:COMM:LAN:SCPI:TELN:ENAB OFF
ON
This is unaffected by Preset but is set to ON with a "Restore System
Defaults->Misc"
No
On | Off
Prior to A.02.00
System, I/O Config, SCPI LAN
All
System Functions
Will set GPIB port to Controller
System
189