Agilent Technologies X Series Manual page 572

Trigger
Meas Mode
List WCDMA,
Power EDGE/GSM
Step
Transmit LTETDD
On/Off
Power
Transmit BLUETOOTH
Analysis
Adjacent BLUETOOTH
Channel
Power
LE BLUETOOTH
In-band
Emission
s
EDR
BLUETOOTH
In-band
Spurious
Emission
s
RF Trigger Source
The RF Trigger Source
is the selected input. The RF trigger source can be queried and changed even while another input is
selected, but it is inactive until RF becomes the selected input.
Note the inclusion of the <measurement> parameter in the command below. Because each measurement
remembers its own Trigger Source, the command must be qualified with the measurement name. Note
that for the Swept SA measurement this is not the case; for backwards compatibility, no <measurement>
parameter is used when setting the Trigger Source for the Swept SA measurement.
Remote Command
Example
572
Preset for RF
IMM
LTETDD:
BTS: External 1
MS: Periodic
Timer
RFB
IMM
IMM
Periodic Timer
command selects the trigger to be used for the specified measurement when RF
:TRIGger:<measurement>[:SEQuence]:RF:SOURce
EXTernal1|EXTernal2|IMMediate|LINE|FRAMe|RFBurst|VIDeo|
IF|ALARm|LAN
:TRIGger:<measurement>[:SEQuence]:RF:SOURce?
TRIG:ACP:RF:SOUR EXT1
Selects the external 1 trigger input for the ACP measurement and the RF input
TRIG:RF:SOUR VID
Selects video triggering for the SANalyzer measurement and the RF input.
For SAN, do not use the <measurement> keyword.
Preset for IQ Notes
IQ not supported
LTETDD:
BTS: External 1
MS: Periodic
Timer
IQ not supported
IQ not supported
IQ not supported
IQ not supported