Agilent Technologies X Series Manual page 309

Initial S/W Revision
Relative To
Selects the marker that the selected marker is relative to (its reference marker).
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Min
Max
Initial S/W Revision
Modified at S/W Revision
Marker Trace
Assigns the specified marker to the designated trace.
Key Path
Mode
Prior to A.02.00
Marker, Properties
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
REFerence <integer>
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
REFerence?
CALC:WAV:MARK:REF 8
CALC:WAV:MARK:REF?
A marker cannot be relative to itself so that choice is grayed out, and if sent
from SCPI generates error –221: "Settings conflict; marker cannot be relative
to itself."
When queried a single value is returned (the specified marker numbers
relative marker).
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
2|3|4|5|6|7|8|9|10|11|12|1
Saved in instrument state.
1
12
Prior to A.02.00
A.03.00
Marker
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
Waveform Measurement
Marker
309