Agilent Technologies X Series Manual page 554

Sweep/Control
Max
Backwards Compatibility SCPI
Initial S/W Revision
Gate Length
Controls the length of time that the gate is on after it opens.
Key Path
Remote Command
Example
Notes
Dependencies
Preset
State Saved
Min
Max
Backwards Compatibility SCPI
Initial S/W Revision
Method
This lets you choose one of the three different types of gating.
Not all types of gating are available for all measurements.
Key Path
Remote Command
554
100 s
[:SENSe]:SWEep:TIME:GATE:DELay
Prior to A.02.00
Sweep/Control, Gate
[:SENSe]:SWEep:EGATe:LENGth <time>
[:SENSe]:SWEep:EGATe:LENGth?
SWE:EGAT:LENG 1
SWE:EGAT:LENG?
Units of time are required or no units; otherwise an invalid suffix error
message will be generated.
Grayed out when Gate Method is set to FFT in which case the label changes to
that shown below.
Gate Length
(=1.83/RBW)
2.8 ms
vsd 39-1
The key is also grayed out if Gate Control = Level.
461.6 us
WiMAX OFDMA: 50 us
GSM/EDGE: 200 us
Saved in instrument state
100 ns
5 s
[:SENSe]:SWEep:TIME:GATE:LENGth
Prior to A.02.00
Sweep/Control, Gate
[:SENSe]:SWEep:EGATe:METHod LO|VIDeo|FFT
[:SENSe]:SWEep:EGATe:METHod?