Agilent Technologies X Series Manual page 173

Remote Command
Example
Notes
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
Notes
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
Notes
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
Notes
State Saved
Initial S/W Revision
:CALibration:TEMPerature:CURRent?
:CAL:TEMP:CURR?
Value is in degrees Centigrade.
Value is invalid if using default alignment data (Align Now, All required)
No
Prior to A.02.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TIME:LALL?
:CAL:TIME:LALL?
Value is the elapsed time, in seconds, since the last successful Align Now, All
or Align Now, All but RF was executed.
No
Prior to A.02.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TEMPerature:LALL?
:CAL:TEMP:LALL?
Value is in degrees Centigrade at which the last successful Align Now, All or
Align Now, All but RF was executed.
No
Prior to A.02.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TIME:LRF?
:CAL:TIME:LRF?
Value is the elapsed time, in seconds, since the last successful Align Now, RF
was executed, either individually or as a component of Align Now, All.
No
Prior to A.02.00
System Functions
System
173