Agilent Technologies X Series Manual page 149

Initial S/W Revision
History
The History and Status keys select the Errors view. The Status key has a second line which shows a
number in [square brackets]. This is the number of currently open status items.
Key Path
Initial S/W Revision
Status
See "History" on page 149
Verbose SCPI On/Off
This is a capability that will allow the SCPI data stream to be displayed when a SCPI error is detected,
showing the characters which stimulated the error and several of the characters preceding the error.
Key Path
Mode
Remote Command
Example
Preset
Preset
State Saved
Range
Initial S/W Revision
Refresh
When pressed, refreshes the Show Errors display.
Key Path
Initial S/W Revision
Prior to A.02.00
System, Show, Errors
Prior to A.02.00
System, Show, Errors
All
:SYSTem:ERRor:VERBose OFF|ON|0|1
:SYSTem:ERRor:VERBose?
:SYST:ERR:VERB ON
OFF
This is unaffected by Preset but is set to OFF on a "Restore System
Defaults->Misc"
No
On | Off
Prior to A.02.00
System, Show, Errors
Prior to A.02.00
System Functions
System
149