Agilent Technologies X Series Manual page 72

About the Instrument
Front-Panel Features
Item
# Name
2 Analyzer Setup Keys
3 Measurement Keys
4 Marker Keys
5 Utility Keys
6 Ext Mixer
7 Probe Power
8 Headphones Output
9 Back Space Key
10 Delete Key
11 USB Connectors
12 Local/Cancel/(Esc) Key
13 RF Input
14 Numeric Keypad
72
These keys set the parameters used for making measurements in the current
Mode and Measurement.
These keys select the Mode and the Measurement within the mode. They also
control the initiation and rate of recurrence of measurements.
Markers are often available for a measurement to measure a very specific
point/segment of data within the range of the current measurement data.
These keys control system-wide functionality such as:
• instrument configuration information and I/O setup,
• printer setup and printing,
• file management, save and recall,
• instrument presets.
Provides LO output signal to and receives IF input signals from an external
mixer. See the Specifications Guide for details on signal levels. PXA only.
Supplies power for external high frequency probes and accessories.
Headphones can be used to hear any available audio output.
Press this key to delete the previous character when entering alphanumeric
information. It also works as the Back key in Help and Explorer windows.
Press this key to delete files or to perform other deletion tasks.
Standard USB 2.0 ports, Type A. Connect to external peripherals such as a
mouse, keyboard, DVD drive, or hard drive.
If you are in remote operation, Local:
• returns instrument control from remote back to local (the front panel).
• turns the display on (if it was turned off for remote operation).
• can be used to clear errors. (Press the key once to return to local control,
and a second time to clear error message line.)
If you have not already pressed the units or Enter key, Cancel exits the
currently selected function without changing its value.
Esc works the same as it does on a PC keyboard. It:
• exits Windows dialogs
• clears errors
• aborts printing
• cancels operations.
Connector for inputting an external signal. Make sure that the total power of
all signals at the analyzer input does not exceed +30 dBm (1 watt).
Enters a specific numeric value for the current function. Entries appear on the
upper left of the display, in the measurement information area.
Description
Chapter 2