Agilent Technologies X Series Manual page 159

Configuration Memory Available (Remote Command Only)
This remote command is used to query the amount of Virtual Memory remaining.
Remote Command
Example
Preset
Initial S/W Revision
Configuration Memory Total (Remote Command Only)
This remote command is used to query the limit of Virtual Memory allowed for applications.
Remote Command
Example
Preset
Initial S/W Revision
Configuration Memory Used (Remote Command Only)
This remote command is a query of the amount of Virtual Memory used by all measurement
applications.
Remote Command
Example
Preset
Initial S/W Revision
Configuration Application Memory (Remote Command Only)
This remote command is used to query the amount of Virtual Memory a particular application consumes.
Remote Command
Example
Notes
Preset
Initial S/W Revision
:SYSTem:PON:APPLication:VMEMory[:AVAilable]?
:SYST:PON:APPL:VMEM?
Not affected by Preset
A.02.00
:SYSTem:PON:APPLication:VMEMory:TOTal?
:SYST:PON:APPL:VMEM:TOT?
Not affected by Preset
A.02.00
:SYSTem:PON:APPLication:VMEMory:USED?
:SYST:PON:APPL:VMEM:USED?
Not affected by Preset
A.02.00
:SYSTem:PON:APPLication:VMEMory:USED:NAME?
<INSTrument:SELect name>
:SYST:PON:APPL:VMEM:USED:NAME? CDMA2K
<INSTrument:SELect name> is from the enums of the :INSTrument:SELect
command in Meas Common section 13.3
Value returned will be 0 (zero) if the name provided is invalid.
Not affected by Preset
Prior to A.02.00
System Functions
System
159