Agilent Technologies X Series Manual page 148

System Functions
System
The fields on the Errors display are:
Type (unlabelled) - Displays the icon identifying the event or condition as an error or warning.
ID - Displays the error number.
Message - Displays the message text.
Repeat (RPT) - This field shows the number of consecutive instances of the event, uninterrupted by other
events. In other words, if an event occurs 5 times with no other intervening event, the value of repeat will
be 5.
If the value of Repeat is 1 the field does not display. If the value of Repeat is >1, the time and date shown
are those of the most recent occurrence. If the value of repeat reaches 999,999 it stops there.
Time - Shows the most recent time (including the date) at which the event occurred.
Key Path
Mode
Remote Command
Example
Notes
State Saved
Initial S/W Revision
Next Page
Next Page and Previous Page menu keys move you between pages of the log, if it fills more than one
page. These keys are grayed out in some cases:
• If on the last page of the log, the Next Page key is grayed out
• If on the first page of the log, the Previous Page key is grayed out.
• If there is only one page, both keys are grayed out.
Key Path
Initial S/W Revision
Previous Page
See "Next Page" on page
Key Path
148
System, Show
All
:SYSTem:ERRor[:NEXT]?
:SYST:ERR?
The return string has the format:
"<Error Number>,<Error>"
Where <Error Number> and <Error> are those shown on the Show Errors
screen
No
Prior to A.02.00
System, Show, Errors
Prior to A.02.00
148.
System, Show, Errors