Agilent Technologies X Series Manual page 197

Restore Misc Defaults
This selection causes miscellaneous system settings to be reset to their default values. With this reset,
you lose the GPIB address and it is reset to 18, so this should be used with caution. This level of Restore
System Defaults does not affect any other system settings, mode settings and does not cause a mode
switch. This miscellaneous group contains the rest of the settings that have not been part of the other
Restore System Defaults groups. The following table is a complete list of settings associated with this
group:
Miscellaneous Setting
Verbose SCPI
GPIB Address
Auto File Name Number
Save Type
State Save To
Screen Save To
DISP:ENABle
Full Screen
SCPI Telnet
SCPI Socket
SICL Server
Display Intensity
Display Backlight
Display Theme
System Annotation
The SYST:PRES:TYPE
Confirmation is required to restore the factory default values. The confirmation dialog is:
Default Value
Off
18
000
State
Register 1
SCREEN000.png
ON
Off
ON
ON
ON
100
ON
TDColor
ON
MODE
System Functions
System
197