Agilent Technologies X Series Manual page 156

System Functions
System
Select All
Marks all applications in the selection list. This allows you to enable all applications licensed on the
instrument for pre-loading, or is a convenience for selecting all applications in one operation and then
letting you deselect individual applications.
Key Path
Initial S/W Revision
Deselect All
Clears the marks from all applications in the selection list, with the exception of the Power On
application. The Power On application cannot be eliminated from the pre-load list.
Key Path
Initial S/W Revision
Move Up
The application list is the order in which applications appear in the Mode Menu. This key enables you to
shift the selected application up in the list, thus moving the selected application earlier in the Mode
Menu.
Key Path
Initial S/W Revision
Move Down
The application list is the order in which applications appear in the Mode Menu. This key enables you to
shift the selected application down in the list, thus moving the selected application later in the Mode
Menu.
Key Path
Initial S/W Revision
Select/Deselect
Toggles the currently highlighted application in the list.
Key Path
Initial S/W Revision
Save Changes and Exit
Applies the configuration of the applications list. The marked applications will be pre-loaded in memory
the next time the instrument application is started, and the order of the applications in the list will be the
order of the applications in the Mode Menu.
156
System, Power On, Configure Applications
A.02.00
System, Power On, Configure Applications
A.02.00
System, Power On, Configure Applications
A.02.00
System, Power On, Configure Applications
A.02.00
System, Power On, Configure Applications
A.02.00