Agilent Technologies X Series Manual page 175

Example
Notes
State Saved
Initial S/W Revision
Key Path
Mode
Remote Command
Example
State Saved
Restriction and Notes
Key Path
Mode
Remote Command
Example
State Saved
Restriction and Notes
Key Path
Mode
Remote Command
Example
State Saved
Restriction and Notes
Key Path
Mode
Remote Command
Example
State Saved
:CAL:AUTO:TIME:OFF?
Value is the elapsed time, in seconds, since Auto Align has been set to Off or
Off with Alert. The value is 0 if Auto Align is ALL or NORF.
No
Prior to A.02.00
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TIME:RFPSelector:LCONducted?
:CAL:TIME:RFPS:LCON?
No
Values are the date and time the last successful Align Now, 20 Hz – 30 MHz
was executed. The date is separated from the time by a semi-colon character.
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TEMPerature:RFPSelector:LCONducted?
:CAL:TEMP:RFPS:LCON?
No
Value is in degrees Centigrade at which the last successful Align Now, 20 Hz
– 30 MHz was executed.
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TIME:RFPSelector:LRADiated?
:CAL:TIME:RFPS:LRAD?
No
Value is the date and time the last successful Align Now, 30 MHz – 3.6 GHz
was executed. The date is separated from the time by a semi-colon character.
Visual annotation in the Show Alignment Statistics screen
All
:CALibration:TEMPerature:RFPSelector:LRADiated?
:CAL:TEMP:RFPS:LRAD?
No
System Functions
System
175