Agilent Technologies X Series Manual page 121

Register 1 thru Register 5
Selecting any one of these register keys causes the Traces and State from the specified Register to be
recalled. Each of the register keys annotates whether it is empty or at what date and time it was last
modified.
Trace registers are shared by all modes, so recalling from any one of the 5 registers may cause a mode
switch to the mode that was active when the save to the Register occurred.
After the recall completes, the message "Trace Register <register number> recalled" appears in the
message bar.
Key Path
Readback
Initial S/W Revision
Key Path
Readback
Initial S/W Revision
Key Path
Readback
Initial S/W Revision
Key Path
Readback
Initial S/W Revision
Key Path
Readback
Initial S/W Revision
To Trace
These menu selections let you pick which Trace to recall the saved trace into. Not all modes have the full
6 traces available. The default is the currently selected trace, selected in this menu or in the
Trace/Detector, Export Data, Import Data, or Save Trace menus, except if you have chosen All, then it
remains chosen until you specifically change it to a single trace.
Recall, Trace
Date and time with seconds resolution of the last Save is displayed on the key,
or "(empty)" if no prior save operation performed to this register.
Prior to A.02.00
Recall, Trace
Date and time with seconds resolution of the last Save is displayed on the key,
or "(empty)" if no prior save operation performed to this register.
Prior to A.02.00
Recall, Trace
Date and time with seconds resolution of the last Save is displayed on the key,
or "(empty)" if no prior save operation performed to this register.
Prior to A.02.00
Recall, Trace
Date and time with seconds resolution of the last Save is displayed on the key,
or "(empty)" if no prior save operation performed to this register.
Prior to A.02.00
Recall, Trace
Date and time with seconds resolution of the last Save is displayed on the key,
or "(empty)" if no prior save operation performed to this register.
Prior to A.02.00
System Functions
Recall
121