View/Display
State Saved
Initial S/W Revision
Theme
This key allows you to change the Display theme. This is similar to the Themes selection under Page
Setup and Save Screen Image. The four themes are detailed below.
Key Path
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision
Backlight
Accesses the display backlight on/off keys. This setting may interact with settings under the Windows
"Power" menu.
When the backlight is off, pressing ESC, TAB, SPACE, ENTER, UP, DOWN, LEFT, RIGHT, DEL,
BKSP, CTRL, or ALT turns the backlight on without affecting the application. Pressing any other key
will turn backlight on and could potentially perform the action as well.
Key Path
Remote Command
Preset
Initial S/W Revision
On
Turns the display backlight on.
Key Path
Example
620
Not saved in instrument state.
Prior to A.02.00
View/Display, Display, System Display Settings
:DISPlay:THEMe TDColor|TDMonochrome|FCOLor|FMONochrome
:DISPlay:THEMe?
DISP:THEM TDM sets the display theme to 3D Monochrome.
TDColor – 3D is the standard color theme with filling and shading
TDMonochrome – is similar to 3D color, but only black is used
FCOLor – flat color is intended for inkjet printers to conserve ink. It uses a
white background instead of black.
FMONochrome – is like flat color, but only black is used
TDColor (Set by Restore Misc Defaults)
Not saved in instrument state.
Prior to A.02.00
View/Display, Display, System Display Settings
:DISPlay:BACKlight ON|OFF
:DISPlay:BACKlight?
ON (Set by Restore Misc Defaults)
Prior to A.02.00
View/Display, Display, System Display Settings, Backlight
DISP:BACK ON