Agilent Technologies X Series Manual page 237

Initial S/W Revision
Band/Interval Span for Frequency Domain
Sets the width of the span for the selected marker.
Key Path
Mode
Remote Command
Example
Notes
Couplings
Preset
State Saved
Min
Max
Initial S/W Revision
Band/Interval Left for Frequency Domain
Sets the left edge frequency or time for the band of the selected marker.
Key Path
Mode
Remote Command
Example
Notes
Couplings
Prior to A.02.00
Marker Function, Band Adjust
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion:BAND:SPAN <freq>
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion:BAND:SPAN?
CALC:SPEC:MARK12:FUNC:BAND:SPAN 20MHz
CALC:SPEC:MARK12:FUNC:BAND:SPAN?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
Changing the Band/Interval Span necessarily changes the Band/Interval Left
and Band/Interval Right values
10% of Span
Saved in instrument state.
0
26.5GHz
Prior to A.02.00
Marker Function, Band Adjust
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion:BAND:LEFT <freq>
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion:BAND:LEFT?
CALC:SPEC:MARK12:FUNC:BAND:LEFT 20GHz
CALC:SPEC:MARK12:FUNC:BAND:LEFT?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
Changing the Band/Interval Left necessarily changes the Band/Interval Span
and Band/Interval Right values
Complex Spectrum Measurement
Marker Function
237