Agilent Technologies X Series Manual page 81

Item
# Name
3 USB Connector
4 USB Connectors
5 MONITOR
6 LAN
7 Line power input
8 Removable Disk Drive
9 Digital Bus
10 Analog Out
11 TRIGGER 2 OUT
12 TRIGGER 1 OUT
13 Sync
14 TRIGGER 2 IN
15 TRIGGER 1 IN
16 Noise Source Drive +28 V
(Pulsed)
17 SNS Series Noise Source
18 10 MHz OUT
19 Preselector Tune Out
20 Aux IF Out
Chapter 2
USB 2.0 port, Type B. USB TMC (test and measurement class) connects to
an external pc controller to control the instrument and for data transfers
over a 480 Mbps link.
Standard USB 2.0 ports, Type A. Connect to external peripherals such as a
mouse, keyboard, printer, DVD drive, or hard drive.
Allows connection of an external VGA monitor.
A TCP/IP Interface that is used for remote analyzer operation.
The AC power connection. See the product specifications for more details.
Standard on current analyzers. Optional on older MXAs and EXAs.
Reserved for future use.
For PXA Option YAV:
Screen Video
Log Video
Linear Video
For Option EMC:
Demod Audio
A trigger output used to synchronize other test equipment with the
analyzer. Configurable from the Input/Output keys.
A trigger output used to synchronize other test equipment with the
analyzer. Configurable from the Input/Output keys.
Reserved for future use.
Allows external triggering of measurements.
Allows external triggering of measurements.
For use with Agilent 346A, 346B, and 346C Noise Sources.
For use with Agilent N4000A, N4001A, N4002A Smart Noise Sources
(SNS).
An output of the analyzer internal 10 MHz frequency reference signal. It is
used to lock the frequency reference of other test equipment to the
analyzer.
Reserved for future use.
CR3 Second IF Out (PXA, MXA, and EXA)
CRP Arbitrary IF Out (PXA, MXA, and EXA)
ALV Log Video (PXA)
About the Instrument
Rear-Panel Features
Description
81