Agilent Technologies X Series Manual page 439

This key is also available in the Sweep/Control menu.
Key Path
Mode
Remote Command
Example
Notes
Dependencies
Couplings
Initial S/W Revision
Key Path
Remote Command
Example
Notes
Initial S/W Revision
Record Length
This specifies the length of the next recording. (You cannot use this to modify the length of the current
recording.) The length defaults to seconds, but you can also specify it in points at the current sample rate,
or in time records at the current time record length.
Key Path
Input/Output, Data Source
VSA
[:SENSe]:RECording:INITiate[:IMMediate]
REC:INIT
This is command only, there is no query. See the Recall functionality to access
previously saved data.
Grayed out in the SA measurement.
Changes Data source to Recorded Data.
Prior to A.02.00
Input/Output, Data Source
[:SENSe]:RECording:ABORt
REC:ABOR
This is command only, there is no query. The command does nothing if it is
sent when there is no recording in progress.
Prior to A.02.00
Input/Output, Data Source
Input/Output
439