Agilent Technologies X Series Manual page 578

Trigger
Trig Slope
Controls the trigger polarity. It is set positive to trigger on a rising edge and negative to trigger on a
falling edge.
Key Path
Remote Command
Example
Preset
State Saved
Backwards Compatibility SCPI
Backwards Compatibility SCPI
Initial S/W Revision
Trig Delay
Controls a time delay during that the analyzer will wait to begin a sweep after meeting the trigger
criteria. You can use negative delay to pre-trigger the instrument in the time domain or FFT, but not in
swept spans.
Key Path
Remote Command
Example
578
Trigger, Video
:TRIGger[:SEQuence]:VIDeo:SLOPe POSitive|NEGative
:TRIGger[:SEQuence]:VIDeo:SLOPe?
TRIG:VID:SLOP NEG
POSitive
Saved in instrument state
:TRIGger[:SEQuence]:SLOPe
:TRIGger[:SEQuence]:IF:SLOPe
For backward compatibility, the following commands should update all
instances of trigger slope (video/external/line). The query returns the trigger
slope setting of the selected trigger source.
:TRIGger[:SEQuence]:SLOPe POSitive|NEGative
:TRIGger[:SEQuence]:SLOPe?
For backward compatibility with VSA/PSA comms apps, we need to alias
:TRIGger[:SEQuence]:IF:SLOPe NEGative|POSitive
:TRIGger[:SEQuence]:IF:SLOPe?
Prior to A.02.00
Trigger, Video
:TRIGger[:SEQuence]:VIDeo:DELay <time>
:TRIGger[:SEQuence]:VIDeo:DELay?
:TRIGger[:SEQuence]:VIDeo:DELay:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:VIDeo:DELay:STATe?
TRIG:VID:DEL:STAT ON
TRIG:VID:DEL 100 ms