Agilent Technologies X Series Manual page 603

Remote Command
Example
Preset
State Saved
Initial S/W Revision
Trig Delay
Controls a time delay during which the analyzer will wait to begin a sweep after meeting the trigger
criteria. You can use negative delay to pre-trigger the instrument in time domain or FFT.
Key Path
Remote Command
Example
Preset
State Saved
Range
Initial S/W Revision
Input I
Pressing this key, when it is not selected, selects the I channel's ADC voltage as the trigger. The Input I
trigger condition is met when the voltage crosses the trigger level.
Key Path
Example
Readback Text
Initial S/W Revision
Trigger Level
Sets a level for the Input I trigger. When the signal crosses this level, with the chosen slope, the trigger
occurs.
:TRIGger[:SEQuence]:QDEMod:SLOPe POSitive | NEGative
:TRIGger[:SEQuence]:QDEMod:SLOPe?
TRIG:QDEM:SLOP POS
POSitive
Saved in instrument state
Prior to A.02.00
Trigger, Baseband I/Q, Q (Demodulated)
:TRIGger[:SEQuence]:QDEMod:DELay <time>
:TRIGger[:SEQuence]:QDEMod:DELay?
:TRIGger[:SEQuence]:QDEMod:DELay:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:QDEMod:DELay:STATe?
TRIG:QDEM:DEL 10 ms
TRIG:QDEM:DEL:STAT ON
1 us
OFF
Saved in instrument state
–2.5 s to +10 s
Prior to A.02.00
Trigger, Baseband I/Q
TRIG:<meas>:SOUR IINP
Input I
Prior to A.02.00
Trigger
603