Honda Accord 2008 Manual page 248

07/11/02 09:09:58 61TA0000_070_0023
Reassembly
1. Install a piston pin snap ring (A).
＊０８
2. Coat the piston pin bore in the piston, the bore in
the connecting rod, and the piston pin with new
engine oil.
3. Heat the piston to about 158 °F (70 °C).
＊０９
4. Assemble the piston (A) and the connecting rod (B)
with the arrow (C) and the embossed mark (D) on
the same side. Install the piston pin (E).
A
E
A
5. Install the remaining snap ring (F).
6. Turn the snap rings in the ring grooves until the
end the gaps are positioned at the bottom of the
piston.
C
D
F
B
7-23
＊１０