Honda Accord 2008 Manual page 203

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:25:05 61TA0000_060_0080

Cylinder Head

Cylinder Head Removal (cont'd)

12. Remove the two bolts (A) securing the connecting

13. Remove the water bypass hose (B).

14. Remove the following engine wire harness

connectors and wire harness clamps from the

cylinder head:

• Engine coolant temperature (ECT) sensor 1

• Camshaft position (CMP) sensor A (Intake)

• Camshaft position (CMP) sensor B (Exhaust)

• Two rocker arm oil control solenoid connectors

• Two rocker arm oil pressure switch connectors

• EVAP canister purge valve connector

• Variable valve timing control (VTC) oil control

solenoid valve connector

• Engine oil pressure switch connector

15. Remove the cam chain (see page 6-64).

16. Remove the rocker arm assembly (see page 6-84).

17. Remove the cylinder head bolts. To prevent

warpage, loosen the bolts in sequence 1/3 turn at a

time; repeat the sequence until all bolts are

18. Remove the cylinder head.

Chapters

Table of Contents