Honda Accord 2008 Manual page 244

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:09:33 61TA0000_070_0019

5. Scored or scratched cylinder bores must be honed.

6. Check the top of the engine block for warpage.

Measure along the edges and across the center as

Engine Block Warpage

Standard (New): 0.07 mm (0.003 in.) max.

Service Limit:

0.10 mm (0.004 in.)

PRECISION STRAIGHT EDGE

7. Calculate the difference between the cylinder bore

diameter and the piston diameter. If the clearance

is near or exceeds the service limit, inspect the

piston and cylinder bore for excessive wear.

Piston-to-Cylinder Bore Clearance

Standard (New): 0.020 0.040 mm

(0.0008 0.0016 in.)

Service Limit:

0.05 mm (0.002 in.)

SERVICE LIMIT

0.05 mm (0.002 in.)

Chapters

Table of Contents