07/11/02 09:25:42 61TA0000_060_0084
Cylinder Head
Rocker Arm Assembly Removal
1. Remove the cam chain (see page 6-64).
2. Loosen the rocker arm adjusting screws (A).
*01
3. Remove the camshaft holder bolts. To prevent
damaging the camshafts, loosen the bolts, in
sequence, two turns at a time.
NOTE: Bolt
*02
6-84
A
A
is not on all engines.
4. Remove cam chain guide B, the camshaft holders,
and the camshafts.
5. Insert the bolts (A) into the rocker shaft holder, then
remove the rocker arm assembly (B).
A
TA08AEJA14666300000KAAT00
A
B
*03