Installing The Router; Installing And Connecting An Acx5000 Router - Juniper ACX5048 Manual

CHAPTER 10

Installing the Router

Installing and Connecting an ACX5000 Router

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Installing and Connecting an ACX5000 Router on page 103
Mounting an ACX5000 Router in a Rack or Cabinet on page 104
You can mount an ACX5000 router:
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets
provided with the router for this configuration.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket
provided in the standard mounting kit for this configuration. Recessed mounting is
primarily used in enclosed cabinets.
To install and connect an ACX5000 router:
Follow the instructions in
1.
Determine how the device is to be mounted.
2.
Flush or recessed mounted in a rack or cabinet, see
in a Rack or Cabinet" on page
Follow the instructions in:
3.
Connecting Earth Ground to an ACX5000 Router on page 112
a.
"Connecting AC Power to an ACX5000 Router" on page 114
b.
Power to an ACX5000 Router" on page 116
Registering Products–Mandatory for Validating SLAs
c.
Configure the ACX5000 router. See
4.
Rack Requirements for an ACX5000 Router on page 49
Cabinet Requirements for an ACX5000 Router on page 50
Clearance Requirements for Airflow and Hardware Maintenance for an ACX5000
Router on page 51
"Unpacking an ACX5000 Router" on page
"Mounting an ACX5000 Router
104.
as required
"Configuring an ACX5000 Router" on page
101.
or "Connecting DC
125.
103