Connecting The Mx2020 Router; Tools And Parts Required For Mx2020 Router Connections; Connecting The Mx2020 Router To Management And Alarm Devices; Connecting The Mx2020 Router To A Network For Out-Of-Band Management - Juniper MX2020 Hardware Manual

CHAPTER 8

Connecting the MX2020 Router

Tools and Parts Required for MX2020 Router Connections

Related
Documentation

Connecting the MX2020 Router to Management and Alarm Devices

Connecting the MX2020 Router to a Network for Out-of-Band Management

Copyright © 2013, Juniper Networks, Inc.
Tools and Parts Required for MX2020 Router Connections on page 109
Connecting the MX2020 Router to Management and Alarm Devices on page 109
Connecting MPC or MIC Cables to the MX2020 Router on page 113
To connect the router to management devices and MPCs, you need the following tools
and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Connecting the MX2020 Router to a Network for Out-of-Band Management on page 109
Connecting the MX2020 Router to a Console or Auxiliary Device on page 110
Connecting an MX2020 Router to an External Alarm-Reporting Device on page 111
Connecting the MX2020 Router to a Network for Out-of-Band Management on page 109
Connecting the MX2020 Router to a Console or Auxiliary Device on page 110
Connecting an MX2020 Router to an External Alarm-Reporting Device on page 111
To connect the CB-RE to a network for out-of-band management, connect an Ethernet
cable with RJ-45 connectors to the
cable is provided with the router. To connect to the
Turn off the power to the management device.
1.
port on the CB-RE interface. One Ethernet
MGMT
MGMT port on the CB-RE interface:
109