CHAPTER 18
Connecting the MX240 Router to the
Network
Tools and Parts Required for MX240 Router Connections
Related
Documentation
Connecting the MX240 Router to Management and Alarm Devices
Copyright © 2017, Juniper Networks, Inc.
Tools and Parts Required for MX240 Router Connections on page 211
Connecting the MX240 Router to Management and Alarm Devices on page 211
Connecting the MX240 Router to a Network for Out-of-Band Management on page 214
Connecting the MX240 Router to a Management Console or Auxiliary Device on page 215
Connecting the MX240 Router to an External Alarm-Reporting Device on page 216
Connecting DPC, MPC, MIC, or PIC Cables to the MX240 Router on page 217
To connect the router to management devices and line cards, you need the following
tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Connecting the MX240 Router to Management and Alarm Devices on page 211
Connecting DPC, MPC, MIC, or PIC Cables to the MX240 Router on page 217
Connecting the MX240 Router to a Network for Out-of-Band Management on page 212
Connecting the MX240 Router to a Management Console or Auxiliary Device on page 212
Connecting the MX240 Router to an External Alarm-Reporting Device on page 213
211