Unpacking The Mx204; Tools And Parts Required To Unpack The Mx204 Router - Juniper MX204 Hardware Manual

See "Powering On an AC-Powered MX204 Router" on page
See "Powering On a DC-Powered MX204 Router" on page
11. Perform the initial system configuration.
See "Performing the Initial Software Configuration for the MX204 Router" on page
RELATED DOCUMENTATION
MX204 Router Rack Requirements | 61
MX204 Router Clearance Requirements for Airflow and Hardware Maintenance | 60
MX204 Router Cabinet Requirements and Specifications | 58

Unpacking the MX204

IN THIS SECTION

Tools and Parts Required to Unpack the MX204 Router | 78

Unpacking MX204 Router | 79
Verifying the MX204 Router Parts Received | 80
Tools and Parts Required to Unpack the MX204 Router
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
SEE ALSO
MX204 Chassis Description | 23
94.
98.
108.
78