Unpacking The Mx240 Router; Tools And Parts Required To Unpack The Mx240 Router - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
Related
Documentation

Unpacking the MX240 Router

Tools and Parts Required to Unpack the MX240 Router

Unpacking the MX240 Router
166
Connect cables to the network and external devices as described in Connecting the
6.
MX240 Router to Management and Alarm Devices.
Connect the grounding cable as described in
7.
Connect the AC power cord or DC power cables:
8.
Powering On an AC-Powered MX240 Router on page 198
Powering On a DC-Powered MX240 Router with Normal Capacity Power Supplies
on page 202
Power on the router:
9.
Perform the initial system configuration as described in
10.
Router" on page 211.
Definition of Safety Warning Levels
MX240 Router Physical Specifications on page 142
Tools and Parts Required to Unpack the MX240 Router on page 166
Unpacking the MX240 Router on page 166
Verifying the MX240 Router Parts Received on page 168
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate.
The router chassis is bolted to this pallet. Quick Start installation instructions and a
cardboard accessory box are also included in the shipping crate.
The shipping container measures 21 in. (53.3 cm) high, 23.5 in. (60.0 cm) wide, and
32.5 in. (82.5 cm) deep. The total weight of the container containing the router and
accessories can range from 93 lb (42.2 kg) to 169 lb (76.7 kg).
"Grounding the MX240 Router" on page
"Initially Configuring the MX240
Copyright © 2019, Juniper Networks, Inc.
196.