6. Intake Duct
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the intake manifold.
<Ref. to FU(H4DOTC)-12, REMOVAL, Intake Man-
ifold.>
4) Remove the sensor, engine harness and fuel
pipe attached to the intake manifold. <Ref. to
FU(H4DOTC)-16, DISASSEMBLY, Intake Mani-
fold.>
5) Remove the intake duct from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
19 N
m (1.9 kgf-m, 13.7 ft-lb)
Intake Duct
IN-00203
IN-00221
IN-00221
IN(H4DOTC)-11
INTAKE (INDUCTION)