Table of Contents
Advertisement
2) Connect the fuel delivery hose to the pipe with
an overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When the amount to be inserted is speci-
fied.
Type B: When the amount to be inserted is not
specified.
±
2: 2.5
1.5 mm (0.098
±
L: 22.5
2.5 mm (0.886
(3)
(1)
(2)
(1) Type A
(2) Type B
(3) Pipe
(4) Clamp
(5) Hose
3) Connect the return hose and evaporation hose
to the pipe by approx. 15 mm (0.59 in) from the
hose end.
Fuel return hose:
±
L = 22.5
2.5 mm (0.885
Fuel evaporation hose:
±
L = 17.5
2.5 mm (0.689
CAUTION:
Be sure to inspect the hoses and their connec-
tions for fuel leakage.
(1)
(1) Hose
(2) Clip
(3) Pipe
Fuel Delivery, Return and Evaporation Lines
±
0.059 in)
±
0.098 in)
(4)
(5)
L
FU-00128
±
0.098 in)
±
0.098 in)
(2)
(3)
L/2
L
FU-00129
FU(H4DOTC)-57
FUEL INJECTION (FUEL SYSTEMS)
C: INSPECTION
1) Make sure that there are no cracks on the fuel
pipes and fuel hoses.
2) Make sure the fuel pipe and fuel hose connec-
tions are tightened firmly.
Advertisement
Chapters
Table of Contents
