Table of Contents
Advertisement
4. Canister
A: REMOVAL
1) Lift-up the vehicle.
2) Remove the rear wheel LH.
3) Remove the rear mud guard LH.
4) Remove the canister protector.
5) Disconnect the quick connector (A).
6) Remove the canister (B) from body.
(B)
Canister
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
(A)
(B)
EC-02027
EC(H4DOTC)-5
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure there are no damage or dust on the con-
nection of quick connector. If necessary, clean the
seal surface of pipe.
Tightening torque:
⋅
8.3 N
m (0.85 kgf-m, 6.1 ft-lb)
(B)
C: INSPECTION
Make sure the canister and canister hoses are not
cracked or loose.
(A)
(B)
EC-02027
Advertisement
Chapters
Table of Contents
