FUEL INJECTION (FUEL SYSTEMS)
(3) Hold the connector (A) and push retainer (B)
down.
(4) Pull out the connector (A) from retainer (B).
CAUTION:
Always use a new retainer.
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector of fuel line.
CAUTION:
• Always use a new retainer.
• Make sure that the connected portion is not
damaged or has dust. If necessary, clean the
seal surface of pipe.
(A) Seal surface
(B) Pipe
Fuel Delivery, Return and Evaporation Lines
( B )
( C )
FU-00124
( A )
( B )
FU-00125
FU(H4DOTC)-56
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into the connector completely.
( A )
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in the connector.
• Be sure to inspect the hoses and their con-
nections for fuel leakage.
( A )
(A) Connector
(B) Retainer
(C) Pipe
( B )
( C )
FU-00126
( B )
( C )
FU-00127