Table of Contents
Advertisement
MECHANICAL
19.Camshaft
A: REMOVAL
1) Remove the V-belts. <Ref. to ME(H4DOTC)-40,
REMOVAL, V-belt.>
2) Remove
the
crank
ME(H4DOTC)-43, REMOVAL, Crank Pulley.>
3) Remove the timing belt cover.
<Ref. to ME(H4DOTC)-45, REMOVAL, Timing Belt
Cover.>
4) Remove the timing belt. <Ref. to ME(H4DOTC)-
46, REMOVAL, Timing Belt.>
5) Remove
the
cam
ME(H4DOTC)-54, REMOVAL, Cam Sprocket.>
6) Remove
the
crank
ME(H4DOTC)-55, REMOVAL, Crank Sprocket.>
7) Disconnect the oil flow control solenoid valve as-
sembly connector.
8) Remove the tensioner bracket.
9) Remove the timing belt cover No. 2 (LH).
Camshaft
pulley.
<Ref.
to
sprocket.
<Ref.
to
sprocket.
<Ref.
to
ME-00808
ME-00105
ME-00106
ME(H4DOTC)-56
10) Remove the timing belt cover No. 2 (RH).
11) Remove the spark plug cords.
12) Remove the oil level gauge guide. (LH side)
13) Remove the rocker cover and gasket.
14) Remove the oil pipe.
15) Remove the camshaft position sensor on ex-
haust side.
16) Loosen the oil flow control solenoid valve as-
sembly and intake camshaft cap bolts equally, a lit-
tle at a time in alphabetical sequence shown in the
figure.
(A)
(E)
(F)
(B)
ME-00107
ME-00712
FU-01186
(C)
(D)
ME-00771
Advertisement
Chapters
Table of Contents
