Vlan Port Setting Slot Screen - ZyXEL Communications MSC1000G User Manual

Chapter 15 VLAN Screens
Figure 403 VLAN Port Setting
The following table describes the labels in this screen.
Table 322 VLAN Port Setting
LABEL
ID
State
Card Type
Up Time
Firmware

15.8 VLAN Port Setting Slot Screen

Click VLAN > Port Setting and then click the ID of an active DSL line card. Use this screen to view
the VLAN settings on the DSL line card's ports.
596
DESCRIPTION
This is the slot number of a line card. Click the index number of an active line card to display
which of the line card's ports belong to which VLANs.
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could be due
to the card starting, a firmware upgrade in progress or a malfunction. See
page 1111 for what to do if the line card stays stuck in the inactive state.
This field displays the type of a line card.
This field displays how long the line card has been running since the last time it was started.
This field displays the current firmware version installed on the line card.
Section 38.7 on
Management Switch Card User's Guide