ZyXEL Communications MSC1000G User Manual page 432

Chapter 12 Statistics Screens
Figure 289 Port Statistics: DSL Line Card: Packet Counter
The following table describes the labels in this screen.
Table 207 Port Statistics: DSL Line Card: Packet Counter
LABEL
Flush
Link
Config Rate
Payload Rate
Error
Rx kbps
Tx kbps
Uptime
Packet Counter
IfPkts
IfUCastPkts
IfMCastPkts
IfBCastPkts
IfNUCastPkts
IfDiscard
IfErrors
IfUnknownProtos
12.11.4.2 DSL Line Card Cell Counters
To display detailed ATM cell count information, click the port number in the line card's statistics
screen (see
432
DESCRIPTION
Click Flush to clear the counters.
This field displays the port link status.
This field displays the configured upstream and downstream rates on the port.
This field displays the configured and actual upstream and downstream rates.
This field displays the number of errors that have occurred on the port.
This field displays the receiving rate in kilo bits per second (kbps).
This field displays the transmission rate in kilo bits per second (kbps).
This field displays how long the port has been running since the last time it was started.
This field displays the number of packets received/transmitted on this port.
This field displays the number of unicast packets received/transmitted on this port.
This field displays the number of multicast packets received/transmitted on this port.
This field displays the number of broadcast packets received/transmitted on this port.
This field displays the number of non-unicast packets received/transmitted on this port.
This field displays the number of received/transmitted packets that were discarded on this
port.
This field displays the number of packets received/transmitted with errors on this port.
This field displays the number of packets received with unknown protocol number on this
port.
Figure 288 on page 431) and click the Cell Counter tab.
Management Switch Card User's Guide