Cfm Endpoint Statistics - ZyXEL Communications MSC1000G User Manual

Chapter 12 Statistics Screens
Table 239 IP Statistics (continued)
LABEL
PayloadRate(Us/
Ds kbps)
Rx/Tx(kbps)

12.18 CFM Endpoint Statistics

To view CFM Endpoint settings and statistics, click Statistics > CFM in the navigation panel.
Figure 323 CFM Statistics
The following table describes the labels in this screen.
Table 240 CFM Statistics
LABEL
MD, MA, Endpoint
Id
Load
Index
MD
MA
EPID
REPID
State
Previous, Next
12.19 H.248 Interface Statistics
To view the IES's list of H.248 interfaces and each one's status, click Statistics > H248.
482
DESCRIPTION
This field displays the actual upstream/downstream payload rates for this bonding group.
This field displays the current receiving and transmitting data rates for this bonding group.
DESCRIPTION
Use the drop-down boxes to select an MD, MA, and end point ID for which you want to
see a CFM statistics report.
Click Load to display the available CFM end points based on your selected criteria.
This field displays the index number of a CFM end point. Click an index ID to view
detailed information on the end point.
This field displays the MD name to which an end point belongs.
This field displays the MA name to which an end point belongs.
This field displays an end point ID.
This field displays a list of associated remote end point IDs which have had a CFM test.
This field displays the CFM end point connection status. Active means no connectivity
fault has been found. Error means a connectivity fault has been found on this port (end
point).
Click Previous or Next to respectively go to the previous or the next page if there is
more than one page of information on CFM end points.
Management Switch Card User's Guide