Default - ZyXEL Communications MSC1000G User Manual

9.32 Default

Click Port > Default in the navigation panel to open the screen shown next. Use this screen to
reset a subscriber port's settings to the defaults.
Figure 203 Port > Default
The following table describes the fields in this screen.
Table 145 Port > Default
LABEL
Slot
Port
Apply
9.33 PAEPVC
Click Port > PAEPVC in the navigation panel to open the screen shown next. Use this screen to
configure PPPoA-to-PPPoE translation PVC settings for individual ports.
Figure 204 Port > PAEPVC
Management Switch Card User's Guide
DESCRIPTION
Select the number of a line card's slot. The corresponding subscriber port setup screen for the
type of line card you selected automatically displays.
Select the number of a DSL port on the line card.
Click Apply to reset the specified port's settings to the defaults.
Chapter 9 Subscriber Port Setup Screens
311