Chapter 12 Statistics Screens
12.11 Port Statistics
Click Statistics > Port Statistics in the navigation panel to display the following screen. Use this
screen to view port information (such as packet counts, uptime etc.).
Note: You can only view port information on an active card.
Figure 282 Port Statistics
The following table describes the labels in this screen.
Table 201 Port Statistics
LABEL
ID
State
Card Type
Uptime
Firmware
12.11.1 MSC Port Statistics
Click the slot ID for an MSC card in the Port Statistics screen to view Ethernet port status and
statistics.
424
DESCRIPTION
This column lists the slot numbers of the cards. Click the ID number of an active card to go to a
screen where you can view port status and statistics.
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could be due to
the card starting, a firmware upgrade in progress or a malfunction. See
1111
for what to do if the line card stays stuck in the inactive state.
This field displays the type of a card.
This field displays how long the card has been running since the last time it was started.
This field displays the current firmware version installed on the card.
Section 38.7 on page
Management Switch Card User's Guide