19.8 acl dot1x Commands
Use these commands to configure the IEEE 802.1x authentication feature.
19.8.1 acl dot1x disable Command
Syntax:
acl dot1x disable
This command turns off the IEEE 802.1x authentication feature.
19.8.2 acl dot1x enable Command
Syntax:
acl dot1x enable
This command turns on the IEEE 802.1x authentication feature.
19.8.3 acl dot1x port control Command
Syntax:
acl dot1x port control <slot-port> auto|auth|unauth
where
auto
auth
unauth =
This command sets the IEEE 802.1x port authentication option for specific subscriber ports.
19.8.4 acl dot1x port disable Command
Syntax:
acl dot1x port disable <slot-port>
This command turns off IEEE 802.1x for the specified subscriber ports.
19.8.5 acl dot1x port enable Command
Syntax:
acl dot1x port enable <slot-port>
This command turns on IEEE 802.1x for the specified subscriber ports.
Management Switch Card User's Guide
=
Authenticate all subscribers before they can access the network through this port.
=
Allow all connected users to access the network through this port without
authentication.
Deny all subscribers access to the network through this port.
Chapter 19 acl Commands
665