ZyXEL Communications MSC1000G User Manual page 381

Figure 242 The Profile > VoIP DSP Screen
The following table describes the labels in this screen.
Table 179 The Profile > VoIP DSP Screen
LABEL
Name
Codecs Allowed
Codecs not Allowed
<<
>>
Priority +
Priority -
Management Switch Card User's Guide
DESCRIPTION
Enter a name for this DSP profile (up to 31 ASCII characters; spaces are not allowed).
This is the list of codecs to use in negotiation for this DSP profile. The codecs are
listed by priority: the system tries to use the codec at the top of the list first and, if
that is not possible, tries the second, and so on.
This is the list of codecs supported by the system but not used in this DSP profile.
Use this to move the selected codec from the Not Allowed list to the Allowed list.
Use this to move the selected codec from the Allowed list to the Not Allowed list.
Use this to increase the priority of the selected codec by moving it up one place in the
list.
Use this to decrease the priority of the selected codec by moving it down one place in
the list.
Chapter 11 Profile Screens
381